Send SMS Send Inquiry
Home » Products » Analytical Instruments » MICROPROCESSOR FLAME PHOTOMETER


Send Inquiry
Product Code : AI-60
Product Description


  • Microprocessor Based with Printer Interface
  • Auto Gas Cutoff (Model - 1385)
  • Auto Flame Failure Detection (Model - 1385)
  • Four Measurements in Single Aspiration
  • Setup Storage Facility
  • Sample Data Storage Facility
  • Curve Calibration Programmability Using Maximum of 5 Standards
  • Multiple Calibration Curve Saving Facility
  • Data Processing Through Curve Fitting Techniques, Least Square, Quadratic
  • Online Help Key
  • Direct Results in ppm and meq
  • Useful for Medical & Soil Testing

Microprocessor Flame Photometer - 1385 comes with flame failure detection and auto gas cutoff facility. In case of power failure, the gas cuts off automatically. In case the flame goes off accidently during work, the flame failure alarm sounds after few seconds

Microprocessor Flame Photometers - 1385 & 1382 are used for the determination of sodium, potassium, calcium and lithium. They uses the latest microcontroller technology and advanced engineering techniques so as to give enhanced and reproducibility. They have soft touch membrane key for ease of operations.

The sample solution is aspirated through an automiser. Sample, Air and the fuel are mixed in the mixing chamber which is then sprayed as a very fine mist into the flame. The color of the flame is changed depending upon the concentration of elements present. Radiations from the flame passes through the sensing system and specific narrow band interference filter which permits only the characteristic radiation to pass to the photo-detector. The output of the photo-detector is then processed by the micro-controller and the final results are displayed on the 20 x 4 line alphanumeric lcd with backlit.

In both models 5-Point calibration facility and non-linearity correction is provided through an automatic curve fitting software. Facility has been provided for re-standardization with a single standard, thereby, eliminating the need of the multiple standards once a calibration has been performed


SCIENTIFIC SOLUTIONS All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Ltd.